Vatral® 210 system adhesive
Non-combustible, inorganic, one-component alkali silicate-based adhesive with heat-reflecting and cooling function in the event of fire
For bonding aluminum cladding to Vatral SPM mortar and molded parts made from it
- High temperature resistance: The silicate adhesive is suitable for temperatures up to 1250 °C, even with repeated cooling.
- Fast curing: The fire protection adhesive cures both physically by removing water and by reacting with atmospheric carbon dioxide. The adhesive does not tend to flow and forms a superficial film after just 4 minutes.
- Ready to use: One-component adhesive – can be used immediately.
Product information
areas of application
For bonding mineral fiber, calcium silicate and vatral insulation boards to each other, to each other, to sheet metal or to fabrics and fleeces.
processing
The surfaces to be bonded must be dry and free of dust and grease. Sand painted or coated surfaces if necessary. The room temperature must not be below 10 °C during processing.
technical data
- Non-combustible (Euroclass A1 according to DIN EN 13501-1)
- Shipbuilding approval according to IMO FTPC Part 1
- High temperature resistance
- Hydrophobic finish (water rolls off.)
Modern silicone resins ensure reduced water absorption.
instructions
Wear suitable protective gloves and safety goggles. The information in the safety data sheet must be observed. Irritant effect in contact with eyes and skin. In case of contact with eyes or skin, rinse thoroughly with water.
Packaging and container sizes
Wear suitable protective gloves and safety goggles. The information in the safety data sheet must be observed. Irritant effect in contact with eyes and skin. In case of contact with eyes or skin, rinse thoroughly with water.